|
High Precision Deburring & Chamfering Tools.
Operation & Advantages:
Normally, the bottom side of a drilled hole is deburred for
chamfered, after reversing the same job. Our automatic dual purpose
deburring and chamfering tool deburrs and chamfers a drilled hole at
both side when the tool passes through and reverses. No change either
in the spindle speed or in the direction of spindle rotation or in the
job set-up is required. The tools can be deployed immediately after
drilling. Neither manual interruption nor special operational skill is
required at any stage of it's use. The time required for both purpose
deburring and chamfering is about few seconds. Further, the chamfers
will be uniform and concentric to the bore.
Construction - Size - Features:
The deburring tool consists of only 4 parts - Shank. HSS Blade,
Fulcrum Pin and Screw for adjusting blade projection. The blade, having
certain unique features, is made of HSS and it will be coated with
Tungsten CArbide to enhance wear resistance. After deburring and
chamfering on the top surface of a hole, the blade slowly retracts into
the pocket, provided in the tool shank, as the cutting pressure
increases the blade gets slowly released from the pocker as the cutting
pressure decreases and the deburring and chamfering operations are done
on bottom of the hole.
Special care is taken to ensure that the tool or its parts do not
damage the bore. Standard tools are available in sizes from dia. 5mm to
30mm. The holding shank is cylindrical, so that the tools can be
mounted on the machine spindle through a drill check of a coller.
The robust construction, unique design features Tungsten Carbide
coating make the tools and the blades highly enduring under the most
severe cutting conditions. The blade can be re-sharpened, when it
scuttling edges get blunt. The tools and the spare blade are priced
within every one's reach.
|
